S-Micro is a waterproof (IP68) temperature data logger which can measure up to 240°C with a heat shield. Sensors are available in lengths of 20, 50, 100 or 150 mm. Other lengths are available on request.
Typical applications: sterilisation, pasteurisation, refrigerators and freezers, transport, etc.
RHTemp125 L is a data logger for temperature and relative humidity for the range from -40°C to 125°C. Data are managed with a Windows software and USB interface (DiskInterface HS, Multibay). The battery can be replaced by the user.
Typical applications: monitoring of drying processes, notably of pasta, powders and grains, in extreme environments.
PressureDisk is a data logger for temperature and pressure for the range from -40°C to 140°C and 0 to 5 bar, with a 20 mm external probe. It is managed with a Windows software and USB interface (DiskInterface HS, Multibay). The battery can be replaced by the user.
This logger is particularly suitable for the validation of autoclaves and sterilisation processes.
SterilDisk is a temperature data logger for the range from -20°C to 140°C (calibration from 25°C to 140°C), with a 10 mm external probe. It is protection degree IP68 and made of stainless steel AISI316 L. It is suitable for sterilisation, pasteurisation and the monitoring of cooking processes. It is managed with SPD and TS Manager (compatible with FDA 21 CFR Part 11 Regulation). Its small size (36.5 mm diameter) allows for use inside packaging.
L-Disk HT is a contact temperature data logger for the range from -80°C to 140°C. It has an internal sensor and is managed with a Windows software and USB interface (DiskInterface HS, Multibay). The scanning point is located in the middle of the upper flat surface for contact monitoring. The battery can be replaced by the user.
TempNFC und TempBLE are temperature dataloggers which may be read out wirelessly.